Kingsong F22PRO

Maximum speed After riding for 5 km, the speed limit warning for pedal lifting is automatically released, and the idling speed is 130+KM/h (factory setting is 18km/h first-level alarm, 19km/second-level alarm, 20km/third-level alarm and rocker)

Cruise distance Theoretically about 180km (60KG, 25-30℃ ambient temperature, no wind, 20km/h, flat road)

Maximum climbing angle About 45 degrees 84% (60KG, 25-30℃ ambient temperature

Battery information Battery cell: Samsung 50S 168 cells Rated voltage: 155.4 DC V Maximum charging voltage: 176.8 DCV Rated capacity: 3108Wh Battery protection board: With intelligent BMS battery management system such as balancing, overcharge, overcurrent, short circuit protection, abnormal analysis, etc.

Applicable temperature -10℃/+45℃

Maximum load 140Kg

Protection level IPX6

Charger voltage Input AC 100-240 V, output DC 176.4V, 10A Optional charger with 1000W inverter

Charging time 10A charging: 3108Wh about 2-3h 20A charging: 3108Wh about 1-2h

Motor rated output power 5500W

Motor maximum output power 12000W

OTA The mainboard, display board, and battery BMS all support Bluetooth OTA firmware updates. The new OTA architecture makes the upgrade faster and more stable.

Vehicle size 540(L)*320(W)*750(H)mm

Shock absorber specifications Multifunctional suspension optional, with adjustable rebound compression resistance, adjustable spring preload

Suspension travel Frame suspension travel 100mm

Height and angle of pedal from the ground 245-128 (mm), standard 6-8 degree inclination

Tyre specifications 2.75-14

Net weight of vehicle About 48Kg

Body interface GX20-4-pin flange aviation head charging port; power switch; Type-C 20W fast charging, USB-A music playback interface; light sensor port

Taillight Cool columnar red brake light at the rear

Lift-up shutdown protection Double-click the power switch to stop, and the balance will be restored automatically after the machine is straightened.

Tilt protection Both sides are 45 degrees (if the angle exceeds 45 degrees, the motor will stop running, and this angle can be adjusted on the APP). After the machine is straightened, the power will be restored without restarting.

Speed limit protection Overspeed buzzer alarm or voice broadcast + pedal rocker prompt

Low battery protection Power remaining about 30% to start speed limit protection , linearly decreases according to the alarm setting value. When the remaining power is 5%, the buzzer beeps. When the power is 0%, the front end of the pedal begins to lift and gradually slows down until it stops.

Mainboard waterproof protection The U-shaped groove between the mainboard seat and the upper cover is connected with a silicone sealing ring, which greatly enhances the waterproof performance and provides a safe waterproof guarantee for the mainboard seat.

Pedal anti-slip protection The raised small cylinders are evenly arranged on the pedals according to the force position of the human foot. Compared with the traditional sand paste, it is more effective in preventing slipping and greatly improves the safety performance and riding experience.

Vehicle reverse parking device The parking bracket is designed according to the whole vehicle, making parking more convenient.

Left and right leg protection The left, right, upper and lower leg guards are ergonomically designed, using soft foam self-skinning molding, with moderate hardness, increasing the acceleration and deceleration experience, and better protecting the body.

Battery level The LED dot matrix screen displays the power level when the device is turned on and not riding

Speed display The LED dot matrix screen displays the speed in riding mode

Mainboard Brand-new motherboard architecture, the driver board is designed separately on the aluminum substrate, which has better heat dissipation. 36 brand-new Toll packaged low-resistance MOS provide good power supply for high-power motors. The modular design of the control board and display board provides good support for the entire system.

Data Bluetooth system Adopting 5.1 Bluetooth module, it has stronger compatibility and more stable data transmission.

Lighting, switch, charging port One-piece modular integrated lighting, switch, and charging port design make maintenance more convenient; 1. Lighting: A set of four 5W high-power lamp beads plus a lamp cup combined into one lighting, Automatically adjust the brightness according to the speed, and adjust the angle separately to provide good lighting at night 2. Switch: Silicone waterproof switch design, integrated power on and off switch design 3. Charging port: Dual charging port design, a single charging port supports 10A high current, and the whole vehicle supports 20A fast charging

Music system 1. The system comes with Bluetooth music, and you can play music through the mobile phone connected to the vehicle. Bluetooth uses 5.0 technology to provide better sound quality for playing music; 2. Adopt independent stereo sound design, (configured with 20W woofer + 15W tweeter) *2, sound frequency division design, making the bass more powerful and the treble more transparent; 3. You can insert a U disk to play music on USB-A.

USB output One Type-C fast charge + 1 USB-A (you can insert a U disk to play music)

Taillight Tail RGB light design, red brake light, turn and other lighting effects

Display Integrates power, speed, fault code, spectrum display and other information into one 16*16 dot matrix display

Motor The newly developed high-power 5500W hollow shaft motor provides a strong acceleration feeling for riders

Battery Adopt Samsung 50S 21700 5000mA battery cell, and the whole vehicle is designed with two independent batteries. The battery protection board adopts a new BMS battery management system to monitor the safety of the battery cell in real time. The aluminum profile body and battery box are integrated, which is more reasonable and safer to use

Charging port XT60E-F output port design, which can continuously output 20A current

Shock absorption system Adopt multi-function combined shock absorber , independent compression and rebound adjustable system, creating a new riding experience for users

Seat cushion A comfortable seat cushion is added for skilled and long-distance riders, which is ergonomically designed to relieve the pain of standing riding

Pad The whole vehicle adopts an adjustable design, and the position can be customized according to personal riding requirements